Je webbrowser moet ingesteld worden om eepsites te bezoeken en om de outproxies beschikbaar binnen I2P te kunnen gebruiken. Hieronder zijn handleidingen voor enkele van de meest populaire browsers.

Hoe moet je je browser configureren

Internet Explorer 8 of Chrome

In the tools menu select the "Internet Options" line to open the settings. In the settings window choose the connections tab and click on LAN settings for the proxy port configuration.


Now set the checkmark at "use a proxy server for your LAN" and at the "Bypass proxy server for local addresses". With a click on Advanced-button you open the window to open the ports. Enter the values like on the picture, IP and port 4444 for HTTP, port 4445 for HTTPS. With clicks on OK you save the settings and your browser is set to use the I2P proxy. Note/Privacy tip: Set the FTP proxy to the same settings as the HTTP proxy.



Instructions for Firefox 57 and above:

From the Menu button in the top right, select Preferences. Scroll down until you see the Network Proxy section, as shown in the screenshot below. Click on Settings

Firefox57 Network Options

In the Connection Settings pop-up, select Manual proxy configuration. Set both the HTTP and SSL Proxy to address with port 4444 as shown in the following screenshot.

Connection Settings

Instructions for older versions of Firefox:

From the Tools menu, select Options to bring up the Firefox settings panel. Click the icon labelled Advanced, then click on the Network tab. In the Connections section, click on the Settings button. You'll see a Window like the following:


In the Connection Settings window, click the circle next to Manual proxy configuration, then enter, port 4444 in the HTTP Proxy field. Enter, port 4445 in the SSL Proxy field. Be sure to enter localhost and into the "No Proxy for" box. Note/Privacy tip: Set the FTP proxy to the same settings as the HTTP proxy.



Selecteer in het menu Instellingen Configureer Konqueror. Selecteer in de Web-browsing-groep aan de linkerkant ‘Proxy’; kies vervolgens de optie ‘Gebruik een handmatig gekozen proxy-instelling’ aan de rechterkant.


Voer in het HTTP-veld en poort 4444 in. Voer in het HTTPS-veld en poort 4445 in. In het veld Uitzonderingen moet je,localhost invoeren. Klik op ‘Toepassen’ en dan op ‘Oké’ om het instellingenscherm te sluiten. Privacytip: stel bij de FTP-proxy dezelfde instellingen in als bij de HTTP-proxy.

Outproxy Terms Of Service

Onthoud: I2P is niet ontworpen om proxies te maken die naar het internet leiden. In plaats daarvan is de bedoeling dat het gebruikt wordt als een intern netwerk.

The I2P project itself does not run any proxies to the Internet. The only outproxy is a service from the privacy solutions project. Consider donating to them for a continued stable service. Higher bandwidth will increase with the founding of the organization. Maybe more outproxies too.

By default, I2P comes with two outproxies configured: false.i2p and outproxy-tor.meeh.i2p. Even the domain names are different, it's the same outproxy you hit. (multi-homed/keyed for better performance)

Filtering is active on these outproxies (for example, mibbit and torrent tracker access is blocked). Eepsites that are accessible via .i2p addresses are also not allowed via the outproxies. As a convenience, the outproxy blocks ad servers.

Tor is good application to use as an outproxy to the Internet.