Din hämtning kommer påbörjas inom kort. Om den inte startar inom 5 sekunder, klicka här.

Att göra efter installationen

När installationsprogrammet har installerat färdigt på Windows, så är det bara att klicka på knappen "Starta I2P" som kommer att öppna routerkonsolen, vilken innehåller vidare instruktioner.

På Unix-lika system, kan I2P startas som en tjänst, med hjälp av "i2prouter" skriptet, som finns i mappen du installerade I2P. Byt till den mappen i en kommandotolk och skriv "sh i2prouter status" bör berätta om routerns status. Argumenten "start", "stop" och "restart" kontrollerar tjänsten. Routerkonsolen kan nås från sin vanliga plats. För användare av OpenSolares och andra system för vilka wrappern (i2psvc) inte stöds, starta routern med "sh runplain.sh" istället.

När du installerar för första gången, kom ihåg att justera din NAT/brandvägg om du kan, kom ihåg att de internet nåbara portarna I2P använder, beskrivs här bland andra portar. Om du har lyckats öppna din på för inåtgående TCP, slå även på TCP på inställningssidan.

Granska också och justera bandbreddsinställningarnainställningssidan, eftersom standardinställningarna för 96 KBps ner / 40 kbps upp är tämligen långsam.

If you want to reach I2P Sites via your browser, have a look on the browser proxy setup page for an easy howto.

Your web browser will need to be configured in order to browse web sites on I2P and to utilize the outproxies available within I2P. Below are walkthroughs for some of the most popular browsers.

Firefox-profil för Windows

If you are using Windows, the recommended way of accessing I2P is using the Firefox profile.

If you do not wish to use that profile or are not on Windows, you need to configure your browser yourself. Read below on how to that.

Hur du ställer in din webbläsare

Firefox

Extension-based Configuration: I2P in Private Browsing

A new way of automatically configuring the I2P Browser is currently being tested. It uses the Firefox's "Container Tabs" to build private browsing tools for use with I2P and I2P applications.

It does pre-configuration of your browser by enabling some of the privacy Browser Settings like ResistFingerprinting, and enforces WebRTC proxy obedience. It also contains menus, shortcuts, and monitoring tools improving Firefox's integration with I2P. It should not substantially interfere with your non-I2P Firefox tabs.

The extension, I2P in Private Browsing, can be obtained from the Mozilla addon store.

The source code for the extension is, i2pgit.org.

Instruktioner för Firefox 57 och senare:

From the Menu button in the top right, select Preferences. Scroll down until you see the Network Proxy section, as shown in the screenshot below. Click on Settings

Firefox57-nätverksalternativ

In the Connection Settings pop-up, select Manual proxy configuration. Set both the HTTP and SSL Proxy to address 127.0.0.1 with port 4444 as shown in the following screenshot.

Firefox57
Anslutningsinställningar

Finally, go to the address about:config and find the property media.peerConnection.ice.proxy_only. Ensure that this setting is True.

Firefox57
PeerConnection-inställningar

Chrome

Extension-based Configuration: I2PChrome.js(Experimental, additional configuration)

An experimental, partially-automated configuration process for Chrome is available. In order to configure it, create a new Profile especially for your I2P browsing, separate from the default profile. Then install this Extension in your newly-created profile. This profile is now configured to use I2P. Highly detailed instructions are available at the homepage.

Alla Chrome-versioner

Chromium-Based Browsers like Chrome have slightly different places for their proxy settings depending on variant and platform. These instructions may be slightly different in Brave or Iridium, for instance. From the Main menu, navigate to the Settings, and search for the menu item. Clicking it will open the right settings for your platform.

Chrome Proxy Options

On Windows, this button will launch you into the shared proxy settings used by Internet Explorer, and you can configure it by following the Internet Explorer 8 guide.

IceRaven och andra Firefox för Android

Tilläggsbaserad konfiguration

Modern Firefoxes(The "Fenix" based Firefoxes) do not generally have an about:config page for you to configure proxy settings manually. It is further not possible to use most extensions in Fenix-based Firefoxes. It is possible to enable support about:config and enable more extensions in Firefox Nightly at the time of this writing, but it's a manual and difficult process. IceRaven is a fork of Firefox which enables a collection of extensions while Mozilla and the Mozilla Community work on adding support for extensions to Firefox for Android. It provides the easiest way of configuring a modern Firefox-based Browser for Android. It does not come from Mozilla and carries no guarantees from them. Installing the extension in IceRaven will proxy all your IceRaven browsing over I2P.

If you have not installed IceRaven yet, go to the next step. If you have been using IceRaven for a while, go to the main menu, select the History tab, and make sure that you have cleared information about your past browsing by tapping the "Delete History" button.

Open the IceRaven main menu, and scroll to the top until you see the "Add-Ons" submenu. Tap the "Add-Ons Manager" option in the "Add-Ons" submenu. Install the extension named I2P Proxy for Android and other Systems.

Your IceRaven browser is now configured to use I2P.

This extension also works in pre-Fenix(Pre-Firefox-68) Firefox based web browsers, if installed from the following addons.mozilla.org URL. I2P Proxy for Android and Other Systems

Detta tillägg är identisk med Chromium-tillägget och är byggd från samma källa.

In order to enable extension support in Firefox Nightly, you should follow the steps provided by Mozilla on their Blog

Internet Explorer

In the start menu search for the the "Network and Internet Settings" to open the settings. The last entry in the menu is the Proxy Settings, click it to your proxy to connect to I2P.

IE Internet Alternativ

Fyll i kryssrutan vid "använd en proxy-server för ditt LAN" och vid "Kringå proxy-server för lokala adresser". Med ett klick på Advancerat-knappen öppnar du fönstret för att öppna portarna. Skriv in värdena som i bilden, IP 127.0.0.1, port 4444 för HTTP och port 4445 för HTTPS. Med klick på OK så sparar du inställningar och din webbläsare är inställd på att använda I2P-proxyn.

IE Proxy Inställningar

Användarvillkor För utproxyn

I2P is not designed for creating proxies to the Internet. Instead, it is meant to be used as an internal network.

The I2P project itself does not run any proxies to the Internet. The I2P software includes two outproxies: false.i2p and outproxy-tor.meeh.i2p. Even though domain names are different, it's the same outproxy you hit, multihomed/keyed for better performance. These are run by a volunteer.

http://privacysolutions.no

Som förval kommer I2P med två konfigurerade utproxier: false.i2p och outproxy-tor.meeh.i2p. Även domännamnen är annorlunda, det är samma utproxy du träffar (multi-homed/keyed för bättre prestanda)

Filtering is active on these outproxies (for example, mibbit and torrent tracker access is blocked). I2P Sites that are accessible via .i2p addresses are also not allowed via the outproxies. As a convenience, the outproxy blocks ad servers.

Tor provides a browser to use as an outproxy to the Internet.