Descărcarea dvs va începe în curând. Dacă nu începe în urmatoarele 5 secunde, apăsați click aici.

Muncă post-instalare

După rularea instalatorului pe Windows, pur și simplu faceți click pe butonul "Start I2P" care vă va aduce la router console, unde veți găsi instrucțiuni suplimentare.

Pe sistemele Unix-like, I2P poate fi pornit ca un serviciu de sistem folosind scriptul "i2prouter", situat în directorul selectat pentru I2P. Schimbați la acest director într-o consolă de comandă și tastați "sh i2prouter status" această comandă ar trebui să vă spună statutul router-ului. Argumentele "start", "stop" și "restart" controlează serviciul. router console poate fi accesat prin metoda obisnuită. Pentru utilizatorii de OpenSolaris dar și de alte sisteme pentru care nu este suportat wrapper-ul (i2psvc), porniți router-ul prin comanda "sh runplain.sh".

Când instalați pentru prima dată, vă rugăm să nu uitați să ajustați NAT-ul/ firewall-ul dvs dacă reusiti, ținând cont de porturile Internet pe care le utilizează I2P, descris aici printre alte porturi. Dacă ați deschis cu succes portul de intrare TCP, permiteti, de asemenea, TCP de intrare pe pagina de configurare.

De asemenea, vă rugăm să examinați și să ajustați setările de lățime de bandăpe pagina de configurare, deoarece setările implicite de descărcare de 96 KBps / și de încărcare de 40 KBps sunt destul de lente.

Dacă doriți să încărcați pagini eepsites prin intermediul browser-ului dvs, aruncați o privire pe pagina configurare proxy a browser-ului pentru un ghid simplu.

Your web browser will need to be configured in order to browse web sites on I2P and to utilize the outproxies available within I2P. Below are walkthroughs for some of the most popular browsers.

Firefox Profile for Windows

If you are using Windows, the recommended way of accessing I2P is using the Firefox profile.

If you do not wish to use that profile or are not on Windows, you need to configure your browser yourself. Read below on how to that.

How to configure your browser

Firefox

Experimental, extension-based Configuration

A new way of automatically configuring the I2P Browser is currently being tested. It uses the Firefox's "Container Tabs" to build private browsing tools for use with I2P and I2P applications.

It does pre-configuration of your browser by enabling some of the privacy Browser Settings like ResistFingerprinting, and enforces WebRTC proxy obedience. It also contains menus, shortcuts, and monitoring tools improving Firefox's integration with I2P. It is a by-product of the I2P Browser project.

The extension, I2P in Private Browsing, can be obtained from the Mozilla addon store.

Instructions for Firefox 57 and above:

From the Menu button in the top right, select Preferences. Scroll down until you see the Network Proxy section, as shown in the screenshot below. Click on Settings

Firefox57 Network Options

In the Connection Settings pop-up, select Manual proxy configuration. Set both the HTTP and SSL Proxy to address 127.0.0.1 with port 4444 as shown in the following screenshot.

Firefox57
Connection Settings

Finally, go to the address about:config and find the property media.peerConnection.ice.proxy_only. Ensure that this setting is True.

Firefox57
PeerConnection Settings

Chrome

Experimental, extension-based Configuration

An experimental, partially-automated configuration process for Chrome is available. In order to configure it, create a new Profile especially for your I2P browsing, separate from the default profile. Then install this Extension in your newly-created profile. This profile is now configured to use I2P. Highly detailed instructions are available at the homepage.

All Chrome Versions

Chromium-Based Browsers like Chrome have slightly different places for their proxy settings depending on variant and platform. These instructions may be slightly different in Brave or Iridium, for instance. From the Main menu, navigate to the Settings, and search for the menu item. Clicking it will open the right settings for your platform.

Chrome Proxy Options

On Windows, this button will launch you into the shared proxy settings used by Internet Explorer, and you can configure it by following the Internet Explorer 8 guide.

Internet Explorer

In the start menu search for the the "Network and Internet Settings" to open the settings. The last entry in the menu is the Proxy Settings, click it to your proxy to connect to I2P.

IE Internet Options

Now set the checkmark at "use a proxy server for your LAN" and at the "Bypass proxy server for local addresses". With a click on Advanced-button you open the window to open the ports. Enter the values like on the picture, IP 127.0.0.1 and port 4444 for HTTP, port 4445 for HTTPS. With clicks on OK you save the settings and your browser is set to use the I2P proxy.

IE Proxy Settings

Outproxy Terms Of Service

Remember: I2P was not designed for creating proxies to the outer Internet. Instead, it is meant to be used as an internal network.

The I2P project itself does not run any proxies to the Internet. The only outproxy is a service from the privacy solutions project. Consider donating to them for a continued stable service. Increased funding will allow them to improve this service.

http://privacysolutions.no

By default, I2P comes with two outproxies configured: false.i2p and outproxy-tor.meeh.i2p. Even the domain names are different, it's the same outproxy you hit. (multi-homed/keyed for better performance)

Filtering is active on these outproxies (for example, mibbit and torrent tracker access is blocked). Eepsites that are accessible via .i2p addresses are also not allowed via the outproxies. As a convenience, the outproxy blocks ad servers.

Tor is a good application to use as an outproxy to the Internet.